Environmental equipment | home of craftsmen

Professional supplier and service provider of thermal equipment

Three key considerations for using a professional boiler

Today we introduce the use of professional boilers of the three precautions to help you better understand the use of boilers.


First, pay attention to the way the water: water is an important way to ensure the safe operation of the boiler. Therefore, in the water need to pay attention to the return pipe inlet valve to close, and then open the circulating water pump to adjust the water pressure to the appropriate range and then start injecting water. In the system after the completion of water injection and then adjust the water level of the boiler to the normal situation, it will be able to ensure that the performance of the boiler can be used to fully play.


Second, pay attention to check before ignition: in the boiler for ignition before the boiler must be checked for each auxiliary equipment, especially need to pay attention to whether the valve is opened reliably, so as to ensure that the boiler internal water circulation is smooth, to avoid steam clogging resulting in excessive pressure. In the inspection, if found to close the valve leakage is serious, should be repaired or replaced in a timely manner can not be ignited hastily.


Third, pay attention to clean up the tank debris: boiler heating water are tap water is cleaner and cleaner, but in the long-term use of some debris may be deposited with the water tank, debris deposits are more likely to damage the pump and block the valve. In the use of professional boilers must be checked before the water tank to see if there are grades in a timely manner to clean up, will be able to ensure that the heating effect is better, to avoid the boiler inside the temperature is too high and high air pressure produces danger.


Boiler in use if there is a valve clogging problems, may lead to boiler internal pressure soaring, in the use of water must pay attention to the way, check the boiler internal deposition problems and to carry out pre-ignition inspection, completely to do these three points to ensure that the boiler gas discharge smoothly to promote the boiler to operate normally.

1-2004251Q15c27.jpg

Contact Us

National service hotline:13829262146

Address:No. 6, Road 1, Shegang Industrial Zone, Humen Town, Dongguan, China

TEL:0769-85245101

fax:0769-85247528

Email:13829262146@139.com

technical support:MYIT

Scan QR code to share to WeChat

Online consultation
Contact number

0769-85245101