Heat transfer oil boiler

I. Product Features

1 oil-conducting boiler is based on forced circulation design thinking and development of DC-type special boilers.

2 Closed loop heat supply, connected to the atmosphere, can extend the service life of the boiler, liquid-phase delivery of heat energy, heat loss is small, energy saving effect is remarkable, environmental protection effect.

3 The heat transfer oil boiler adopts a three-loop coil design, and this DC structure determines the safety that traditional boilers do not have.

4 Because of the coil structure, therefore, the heating surface is sufficient, so that it has a high thermal efficiency.

5 Thermal conductive oil boiler, significantly characterized by counter-current heat transfer, combustion exhaust temperature and thermal conductive oil outlet temperature difference of less than 30 ℃.

6 thermal oil boiler its excellent structure, mainly in the lower pressure operation, to obtain the working temperature below 450 ℃, with low-pressure high-temperature characteristics.

Second, the functional characteristics

1, with low pressure, high temperature, safety, energy efficient features.

2、With complete operation control and safety monitoring devices, it can precisely control the working temperature.

3、Reasonable structure, complete supporting, short installation period, convenient operation and maintenance, easy boiler layout.

4、Because the electrically heated organic heat carrier furnace adopts advanced explosion-proof structure, it can be applied in explosion-proof of Ⅱ zone of the factory, and the explosion-proof grade can reach C level.

Third, other features

Compared with the traditional heat transfer medium water and water vapor, heat transfer oil has the following characteristics.

Heat transfer oil boiler

1, in almost atmospheric conditions, you can get a very high operating temperature. That is, you can greatly reduce the operating pressure and safety requirements of high-temperature heating systems, improve the reliability of the system and equipment.

2, can be in a wider temperature range to meet the different temperature heating, cooling process requirements, or in the same system with the same kind of heat transfer oil at the same time to achieve high-temperature heating and low-temperature cooling process requirements. That can reduce the complexity of the system and operation.

3, omit the water treatment system and equipment, improve the thermal efficiency of the system, reduce the maintenance workload of equipment and pipelines. That can reduce the initial investment in heating systems and operating costs.

4, in the case of accidental causes of system leakage, heat transfer oil and open flame encounter may occur when combustion, which is the heat transfer oil system compared with the water vapor system problems. However, in the absence of leakage conditions, due to the heat transfer oil system working under low-pressure conditions, so its operational safety is higher than water and steam systems.

5, heat transfer oil and another type of high-temperature heat transfer medium compared to molten salt, in the operating temperature of 400 ℃ or more, molten salt than heat transfer oil in the price of heat transfer medium and service life has an absolute advantage, but in all other aspects are at a significant disadvantage, especially in the complexity of the system operation.

6, advanced process organic heat carrier boiler is a new type of special heating boiler, with low-pressure, high-temperature operating characteristics, working pressure at 0.1Mpa, and even atmospheric heating temperature, liquid phase 340 ℃ or vapor phase 400 ℃, the overall structure has a certain degree of elasticity, taking into account the operation of the free expansion of various components after the heat, the use of bending coil-type heating surface in order to run a more secure and efficient. Also increased the air preheater, combustion in the furnace chamber to strengthen the degree of flow rate also increased, making more efficient, environmentally friendly, energy-saving services in various industries.