What is the effect of heating a reactor with a gas-fired steam generator?

Chemical production usually requires a certain temperature, for different materials heating methods and temperatures are different. Reaction kettle is a good solution to this problem, many chemical companies are using reaction kettle through the steam to warm up the material.

As an example, the reactor heating temperature below 100 ℃, available below an atmospheric pressure of steam to heat; 100 ~ 180 ℃ range of saturated steam; when the reactor temperature is more, can be used to pressure superheated steam. It can be seen that the steam control of steam temperature and pressure is very accurate and effective, can provide great convenience for the reactor processing.

So what are the advantages of using gas steam generator to heat up the reactor?

First of all, the gas steam generator is fast and sufficient. Using gas as raw material, gas steam generator can do instant saturated steam, which is incomparable with traditional boilers.

The second point is that the amount of steam is simple to control, when the kettle rises to a certain temperature is often an operation to reduce the temperature to a temperature insulation, this operation for the steam generator can quickly reduce the amount of gas to reduce energy consumption, but the traditional boiler because of the difficult to raise the pressure often continue to maintain the full-power output, which invariably wastes a lot of energy.

The third point is the pressure advantage, the traditional boiler belongs to special equipment, the need for a specific boiler room, the boiler room requires a certain distance from the crowded place, this invariably increases the transmission distance of the steam, the transmission will inevitably bring the pressure heat loss, gas steam generator water volume is less than 30L does not belong to the special equipment, and the ability of the safe can be used indoors. This reduces the transmission distance of steam. It can reduce the possibility of running and leaking sent.

The above is the gas steam generator to the reactor heating effect analysis, if your reactor is still using the traditional boiler can contact the steam generator manufacturers to bring you the credibility of this analysis.